# Franke Coffee Machine Repair in Dubai: A400, A600, A800, A1000, Milk Systems and Cleaning

> Franke coffee machine repair in Dubai at your café or hotel. A400, A600, A800, A1000. Milk system, grinder, messages. AED 100 diagnostic.

- Page: https://oneclickdubai.com/services/franke-coffee-machine-repair-dubai
- Diagnostic visit: AED 100, plus 5% VAT. The repair price is agreed before any work starts.
- Book: message us on WhatsApp, +971 55 209 9785
- Reviewed by: Abdul Suboor, Lead Engineer at One Click Dubai, 18 years of experience

Franke makes the fully automatic coffee machines that sit behind many hotel breakfast rooms, office pantries and busy cafés: the A400, A600, A800 and A1000, with the Mytico and Flair lines above and beside them. They grind, brew and froth milk at the touch of a screen, and they depend on daily cleaning more than most machines do. When one stops, the usual causes are a milk system that has not been cleaned as the maker requires, a filter or water problem, a grounds container that was not emptied, or a part that has finally worn.

This page sets out what Franke's own documents say: the A400 and A800 user manuals, the A400 and A1000 product leaflets, and Franke's customer-service page. It covers display messages, taste faults, the cleaning schedule, water quality, power supply and what a repair visit involves. It also says plainly where those documents give no answer, because a wrong error code on a commercial machine costs a café a morning.

Our technicians come to your café, hotel or office, find the fault, quote the price before any part is fitted and repair on site wherever the machine allows. Cafés and hotels get priority booking.

## Franke coffee machine repair in Dubai: what we fix and what it costs

The visit costs AED 100 plus 5% VAT and covers finding the fault. If you go ahead, most Franke repairs cost between AED 80 and AED 400, depending on the part. The price is agreed before work starts.

- Same-day visits in most cases. Send the model name, the wording on the screen and a photo of the rating plate.
- Genuine parts, quoted together with the labour.
- One month of cover on the part and the work.
- On-site repair first. Workshop pickup only for faults that cannot be done where the machine stands.

| Fault | Typical work | Where it sits in the range |
| --- | --- | --- |
| Milk system blocked or milk not frothing | Strip and clean the milk path, replace hoses and seals | Lower to middle |
| Brewing module worn or leaking | Clean, replace seals, replace the module if needed | Lower to middle |
| Grinder noisy, uneven or not grinding | Clear the object, check the disks, replace if worn | Middle to upper |
| Water message with a full tank or no mains flow | Check the tank level sensor, the filter and the mains valve | Lower end |
| Drip tray, grounds container or door sensors wrong | Clean or replace the sensor and its contacts | Lower end |
| Pump or flow meter fault | Test the water path and replace the part | Middle |
| Leaks under the machine | Trace the hose, valve or fitting and replace it | Lower to middle |
| Coffee cold or steam weak | Test the heater, thermostat or steam valve | Middle to upper |
| Board, touchscreen or serious error | Read the fault, test and replace | Upper end |

Where a quote would come close to the price of a new machine, we say so before you decide.

## Which Franke do you have?

The name is on the front or the screen, and the full model code is on the rating plate. Franke writes the milk and cleaning options into the code, which is why two A400s can behave differently. The leaflets define the letters like this.

| Code | Meaning, according to Franke's leaflets |
| --- | --- |
| FM | FoamMaster: hot and cold milk and milk foam with consistency you set |
| MS | Milk System: hot and cold milk and warm foam, dosed by a milk pump (A400 leaflet) |
| CM | CleanMaster: fully automatic cleaning with an integrated cleaning cartridge |
| EC | EasyClean: automatic cleaning with the cleaning fluid added by hand (A400 leaflet) |

| Model | What the leaflets say | Notes |
| --- | --- | --- |
| A400 | One 2 kg, two 1.2 kg or two 0.6 kg lockable bean hoppers; up to two grinders; 4.0 litre built-in tank on most versions, 3.0 litre drip tray | About 140 espresso and 93 cappuccino per hour with one grinder; 186 espresso and 156 cappuccino in parallel |
| A600 | In Franke's new A Line, described in trade press as engineered in Switzerland | Not stated |
| A800 | In the same A Line. Its user manual text is covered below | Franke's UAE site shows both in a hotel case study |
| A1000 | One to three grinders with ceramic disks; 2 kg, 1.2 kg and 0.6 kg hoppers; one or two powder units | 160 espresso and 156 cappuccino per hour single, 238 and 224 parallel |

Franke's leaflets do not agree on every detail between models, so check your own rating plate and manual before you rely on a figure here.

## Who looks after a Franke in the UAE?

Franke's customer-service page describes a network of technicians for maintenance and repairs, with parts replacement and machine maintenance handled by certified partners, plus out-of-hours support and technician training. The page gives no phone number and no regional contact list. Its only contact route is a form, and its Australian version lists nothing for the Middle East.

Franke's own pages and trade coverage of its Middle East launches name no UAE service partner. Trade coverage reports that Franke showed the Mytico at GulfHost Dubai and launched the A Line for Middle East hospitality, and Franke's UAE site carries a hotel case study, but none of those pages names a local service partner or an office address. We therefore do not name one.

| Your situation | What we suggest |
| --- | --- |
| Machine bought from a Franke dealer with a service agreement | Call the dealer or the contact in your agreement first |
| Under a hotel or café lease that includes the machine | Check who owns the maintenance contract before you book us |
| Out of warranty, or no agreement | Message us. We are independent and visit the same day in most cases |
| Bought second-hand or imported | Send the rating plate. Supply and plug details matter (see the power section) |

We are an independent repair company. We do not speak for Franke, and our work does not extend or replace a Franke warranty.

## Franke display messages and colour codes

The A400 manual and the A800 manual text list the messages below. The A800 page directs you to its troubleshooting chapter for the remedies. The remedies in the table come from the A400 manual, and the last column says what we do when the remedy fails.

| Message or symptom | What Franke says | Franke's remedy | When we are called |
| --- | --- | --- | --- |
| Refill milk | Milk container empty or not installed correctly | Fill the container and seat it properly | It stays after the container is seated |
| Bean hopper empty or incorrectly installed | Hopper empty or not installed correctly (A800) | Fill it and install it correctly | The message stays with a full, locked hopper |
| Grounds container must be emptied | Container full | Empty and clean it, at least daily to prevent mould | The sensor reports full when it is empty |
| Internal water tank almost empty | Tank low (A400) | Refill the tank | The tank is full and the message stays |
| Drip tray full or missing | Tray full or not inserted | Empty it, insert it, tap Confirm | The tray sensor fails |
| Filter | Filter due for replacement | Replace the water filter when the machine prompts | It prompts again straight after a change |
| Machine must be cleaned or serviced | A cleaning or service interval has passed | Follow the screen. Cleaning or service is carried out as it shows | Cleaning does not clear it |
| Serious error | A fault the user cannot clear | Switch off at the main switch, wait a minute, switch on, check the power supply, then contact your service technician | Always, if it returns |

Franke also colours its error messages. The manuals describe four levels: a temporary interruption, a fault where the system is still fully functional, a fault with limited functionality, and one where resources are locked. On the A800, tapping an illuminated dashboard symbol shows more detail and instructions.

We do not publish numbered error codes for the A600, A800 or A1000. If your screen shows a number, send us a photo and the model code and we will look it up with the manual in front of us.

## Coffee tastes wrong: what Franke's manuals say

Franke's troubleshooting table in the A400 and A800 manuals is the part most café staff need. It matches the taste to a cause and a remedy. We have grouped the entries and added what we look at when the manual's own remedy does not work.

| Taste or result | Cause listed by Franke | Remedy listed by Franke | Our next step if it does not work |
| --- | --- | --- | --- |
| Stale | Grind too coarse, too little coffee, temperature too low, old coffee, bean hopper not locked correctly | Finer grind, more coffee, higher temperature, fresh coffee, check the hopper lock | Test the grinder disks and the brewing module |
| Strange | Poor grind, very little coffee used, spoiled beans, cleaning solution left in the machine, a dirty cup, water quality such as chlorine or hardness | Contact service for the grind, add beans, replace spoiled beans, rinse the machine, check the cup washing, have the water checked | Sample the water, then inspect the milk and coffee paths |
| Bitter | Temperature too high, grind too fine, too little coffee, roast too dark | Lower the temperature, coarser grind, more coffee, lighter roast | Check the brewing module for blockage |
| Sour | Temperature too low, roast too light, grind too coarse | Raise the temperature, darker roast, finer grind | Check the heater and temperature sensor |
| Powder drink too thick | Too much powder or too little water | Less powder, more water | Check the dosing unit |
| Powder drink too watery | Too little powder or too much water | More powder, less water | Check the dosing unit |
| Powder clumping or damp | Powder system dirty or damp | Clean and dry the powder system | Clean and dry the powder path |

The first-line fixes are free. Most taste complaints on a Franke are settings or cleaning, and a visit is only needed once they have been tried.

## Cleaning a Franke: daily, weekly and by the interval

The A400 manual's cleaning schedule is short and strict, and the A800 text agrees on the key points. A missed clean is the first thing we look for on a milk or taste complaint.

| When | What the manuals say |
| --- | --- |
| At least daily | Clean the machine and its add-on units. Do not operate it again until it has been cleaned as instructed (A400) |
| At least daily | Empty and clean the grounds container to prevent mould |
| Weekly | Clean the bean hopper, powder hopper and brewing module as the supplied cleaning instructions show (A400) |
| After more than two days unused | Rinse the machine before use (A800) |
| Annually or every 30,000 products | Service by a technician (A400) |

### The rinse and clean programmes

On the A400 you reach them from the maintenance level: tap the Franke logo, enter the PIN and go to Cleaning and Maintenance. The menu offers Clean Coffee Machine, Rinse Coffee Machine, Wipe Protection and Filter water quantity. Hot liquid and steam come out of the spouts and nozzles during cleaning, so keep your hands clear.

### What not to use

- Do not spray or hose the machine. The A800 manual says to avoid water jets and high-pressure cleaners.
- Do not pour or spray liquid on the A400. If liquid gets in, or it leaks, disconnect the power.
- Use Franke's own milk system cleaner only. Both manuals say other cleaning agents can leave residue in the milk system.
- Cleaning tablets and descaler can irritate skin and eyes. Follow the product information and wash your hands.
- The A800 manual says children may not carry out any cleaning.

If your daily cleaning is being skipped because the screen takes too long or the staff change often, tell us. We can show your team the sequence on your own machine during a visit.

## Franke milk system problems

Franke's manuals are unusually firm about milk. Both say to use only pre-cooled milk at 2 to 5 degrees Celsius and only Franke's cleaning product. The A400 manual adds that you clean the milk container, the parts that touch milk and the cooling chamber when you empty the cooling unit.

| Symptom | Likely cause | What we check |
| --- | --- | --- |
| Milk will not froth | Milk too warm, dirty milk path or an air leak | The milk temperature, the cooling unit, the pump and the seals |
| Foam is weak or collapses | Milk path not cleaned to the schedule | Hoses, valves and the foam head |
| Milk comes out in spurts | Partly blocked line or a worn seal | The path from the container to the outlet |
| Cleaning does not finish | Wrong cleaner, empty cleaning cartridge or tank | The cleaner type and the cartridge or dosing bottle |
| Sour smell in the cooling chamber | Milk residue | Deep clean the cooling chamber and container |

The accessories differ by variant. The A400 leaflet and manual list a cleaning container, dosing bottle, tablets, microfibre cloth and brush set for the MS EC version, and tablets, a cloth and brushes for the FM CM version. Your machine's variant decides what you should have in the cupboard.

This table is our own working list, not Franke's. Franke's manuals give the milk rules above and no fault table for the milk path.

## Water, filters and descaling

The two manuals give different water specifications. Keep to the one for your model.

| Item | A400 manual | A800 manual text |
| --- | --- | --- |
| Total hardness | 4 to 8 degrees dH, 70 to 140 ppm | Maximum 70 mg CaO per litre (7 dH) |
| Carbonate hardness | 3 to 6 degrees dH | Not stated |
| pH | 6.5 to 7.5 | Ideal pH 7 |
| Other limits | Chlorine under 0.5 mg/l, chloride under 30 mg/l, iron under 0.3 mg/l, TDS 30 to 150 ppm | Not stated |
| Water pressure | Not stated | 0.36 to 8.0 bar |

- The A400 manual says water should not come from a household decalcification system.
- The A800 manual wants a fixed water connection with a shut-off valve, a check valve and a filter that can be inspected.
- The A1000 leaflet gives mains pressure of 0.8 to 8.0 bar, flow above 0.1 litres a second and water below 25 degrees Celsius.

### Changing the filter on an A400

1. **Remove the tank**: Take out the tank and empty it.
2. **Remove the old cartridge**: Unscrew it counterclockwise and dispose of it.
3. **Clean the tank**: Wash the tank before you fit the new cartridge.
4. **Fit the new cartridge**: Prepare it as the cartridge instructions say, install it and refill the tank.
5. **Let it rinse**: The filter rinse runs automatically.

### Descaling

Franke's filters and cleaning tablets are part of its system, and the safest course is to follow the procedure in your own manual and to ask us if it is missing. For the general idea behind descaling any coffee machine, see our [descaling guide](https://oneclickdubai.com/guides/how-to-descale-a-coffee-machine).

## Power, plugs and installation

Franke sells the same models with several electrical set-ups, and the supply must match the plate. The A1000 leaflet lists these options.

| Supply | Power | Fuse |
| --- | --- | --- |
| 380 to 415 V, 3 phase plus neutral, 50 or 60 Hz | 6.7 to 7.9 kW | 16 A |
| 220 to 240 V, single phase, 50 or 60 Hz | 2.6 to 3 kW | 16 A |
| 220 to 240 V, single phase, 50 or 60 Hz | 4.4 to 5.2 kW | 30 A |
| 220 to 240 V, 3 phase without neutral | 5.6 to 7.9 kW | 30 A |
| 200 to 220 V, 2 phase or 3 phase, 50 or 60 Hz | 4.5 to 8.1 kW | 30 A |

- Dubai's supply is 230 volts single phase and 400 volts three phase at 50 hertz. A 380 to 415 volt A1000 fits the three-phase supply, and a 220 to 240 volt version fits the single-phase one.
- A 30 amp single-phase machine needs a circuit rated for it. A café on a shared supply should check the load before adding a second machine.
- A machine made for 200 to 220 volts or 60 hertz does not match Dubai's supply without a transformer or a different version.
- The A400 leaflet lists a 120 volt cooling unit for the US market, which does not suit the UAE.

If a new unit has been installed and trips the breaker, the supply is the first thing we measure.

## Safety on a commercial Franke

- Keep hands away from spouts and nozzles during rinsing and cleaning. Hot liquid and steam are released.
- Do not operate the A400 until it has been cleaned as instructed.
- Never spray or pour liquid onto the machine, and disconnect the power if liquid enters.
- Keep cleaner out of drinks and avoid skin and eye contact.
- Do not use pressure cleaners on the A800.
- In a serious error, switch off at the main switch and wait a minute before restarting, as the A400 manual says.

These are the points in the manuals. Your own manual has the full list.

## Parts we fit on Franke machines

| Part | Job in the machine | What you notice when it wears |
| --- | --- | --- |
| Brewing module and seals | Press the coffee and pass the water | Thin coffee, wet grounds, leaks at the module |
| Grinder disks and motor | Grind each dose | Noise, uneven grind, no grinding |
| Milk pump, hoses and valves | Draw and dose the milk | Weak foam, spurting, no milk |
| Foam head and steam spout | Make foam and steam | Thin foam, weak steam |
| Water pump and flow meter | Move and measure the water | Wrong volumes, no flow |
| Heater and sensors | Heat water and steam | Cool drinks, temperature faults |
| Tray, bin, door and hopper sensors | Report what is in place | False full, missing or empty messages |
| Water filter head and valves | Treat and route the water | Filter messages, leaks |
| Cooling unit | Keep the milk at 2 to 5 degrees | Warm milk, poor foam |
| Control board and touchscreen | Run every product | Errors that return, a dead screen |

Parts are genuine. If a part for an older machine is no longer made, we tell you before we quote.

## What a Franke visit includes

1. **Questions**: We ask what the screen said, when it began and when the machine was last cleaned and serviced.
2. **Supply and plate**: We read the plate, check the supply and look at the water connection and filter.
3. **Cleaning record**: We look at the milk system, the brewing module and the grounds container, because the manuals tie most faults to cleaning.
4. **Tests**: We run the grinder, pump, heater and milk path as far as the fault needs.
5. **One price**: You get a quote before anything is fitted.
6. **Proof**: After the repair we pour a coffee and a milk drink, check for leaks and walk your staff through the daily clean.

A job that cannot be finished on site goes to the workshop. We tell you why, and how long it will take, before we collect the machine.

## Repair or replace a Franke?

Get the quote, price a new machine of the same class, and think hard when the repair reaches about half of it. A café that depends on the machine every morning should weigh downtime as well.

| Fault | Usual advice | Reason |
| --- | --- | --- |
| Brewing module seals or the module | Repair | Routine wear parts |
| Milk hoses, seals, foam head | Repair | Small parts, quick work |
| Grinder disks | Repair | Planned wear item |
| Pump or flow meter | Repair | A fraction of a new machine |
| Cooling unit | Repair or compare | Depends on the fault |
| Board or touchscreen on an older unit | Compare | May approach a new price |
| A serious error that returns | Diagnose first | The price follows the part named |

If a replacement is the better buy, we say so and you pay only the visit fee.

## A daily routine for a café or hotel Franke

This routine is ours, built on the two manuals' rules. Franke gives the intervals, not a timetable, so adapt the times to your opening hours.

| When | Job | Source of the rule |
| --- | --- | --- |
| Before opening | Check the screen for messages, the milk level and temperature, the hoppers and the drip tray | Display messages in the manuals |
| Before opening | Pour a test coffee and a milk drink and taste both | Our habit, to catch a problem before the first customer |
| During service | Empty the grounds container and the drip tray when the screen asks | Manuals |
| After closing | Run the cleaning programme with Franke's cleaner, empty and clean the grounds container, empty the milk container and clean the cooling chamber | A400 and A800 manuals |
| Weekly | Clean the bean hopper, powder hopper and brewing module as the cleaning instructions show | A400 manual |
| After a closure of more than two days | Rinse the machine before the first coffee | A800 manual |

Pin the table above the machine. A clean that nobody is sure they did is an easy fault to prevent, and a tick sheet beside the machine settles it.

## Keeping a log that saves a visit

A short log makes every call faster. We ask for these items when you ring, and a café that records them has the answer ready.

- The date and time of each message, with the exact wording and colour.
- The date of the last clean, rinse, filter change and service.
- The number of products since the last service, if the screen shows it. The A400 manual links the service interval to 30,000 products.
- Any change in beans, milk supplier or water supply before the fault began.
- What you tried and whether it changed anything.

A change of beans or milk supplier is a common explanation for a taste complaint, and the log shows it.

## Planned service for a Franke

The A400 manual asks for a technician service every year or every 30,000 products, whichever comes first. We offer a service plan for cafés, hotels and offices that fits visits to that interval. We agree the plan with you in writing, and plan customers get priority booking.

- A scheduled visit to clean and inspect the milk path, the brewing module, the grinder and the water connection.
- A check of the filter, the water supply and the cooling unit.
- A written note of what we found and what is wearing, so you can budget before a part fails.
- Priority on the day if the machine stops between visits.

We do not quote a plan price here because the figure follows the number of machines and visits. Call and we will give you a figure for your site.

## Keeping a café open when the Franke stops

A stopped machine in a café costs sales every hour. A few preparations make a breakdown easier to manage.

- Know the nearest backup. A second machine, even a smaller one, covers the morning rush.
- Keep Franke's cleaner, tablets and spare filter cartridges in stock. Running out is a self-inflicted fault.
- Photograph the rating plate and the screen message. It lets us check likely parts before we arrive.
- Tell us how many products you serve a day. That decides whether a workshop repair is acceptable or an on-site repair is the only option.
- Do not keep restarting a machine with a serious error. The A400 manual gives one restart, then a call to the technician.

For a hotel with breakfast service, book the repair for the earliest slot after the rush ends, and we will arrange the visit around it.

## Grind, dose and temperature: change one thing at a time

Most taste complaints in Franke's table come down to three settings: the grind, the amount of coffee and the temperature. Each pushes the cup in a predictable direction, so a barista can work through them in order.

| You want to fix | Franke's table points to | Try first |
| --- | --- | --- |
| A cup that tastes flat or stale | A finer grind, more coffee or a higher temperature | Finer grind by one step, then taste |
| A cup that tastes bitter | A coarser grind, more coffee or a lower temperature | Coarser grind by one step, then taste |
| A cup that tastes sour | A finer grind, a higher temperature or a darker roast | Raise the temperature a little, then taste |

- Change one setting, pour, taste, and write the result in the log before touching a second setting.
- The A800 manual lists a bean hopper that is not locked correctly as a cause of stale coffee, so check the lock before you touch the grinder.
- Franke's table lists spoiled beans and beans that have sat in the hopper too long. Fill the hopper with what you will use in a few days.
- If the table's settings do not cure the fault, the cause may be the grinder disks or the brewing module, and that is when a technician is needed.

We are happy to set up the grind and the temperature for your beans during a visit, and to write the settings in your log.

## Chocolate and milk powder units

The A400 and A1000 leaflets list one or two powder dosing units, in 0.6 and 1.2 kilogram sizes, for chocolate or milk powder. Franke's table treats them separately from coffee.

| Result | Cause listed | Remedy listed |
| --- | --- | --- |
| Drink too thick | Too much powder or too little water | Less powder, more water |
| Drink too thin | Too little powder or too much water | More powder, less water |
| Too sweet | Too much powder (A800 table) | Less powder, more water |
| Not sweet enough | Too little powder (A800 table) | More powder, less water |
| Strange taste or clumping | Powder system dirty or damp | Clean and dry the powder system |

Damp is the usual enemy of a powder system in Dubai's humid months. Keep the hopper lid closed, do not top up a damp hopper, and dry the system after cleaning. If clumps keep forming after a proper clean, the dosing unit needs inspection.

## Six checks before you message us

1. **Read the screen**: Write down the message and any code before you switch off.
2. **Seat the containers**: Re-seat the milk container, bean hopper, drip tray and grounds container and lock the hopper.
3. **Check the milk**: Use pre-cooled milk at 2 to 5 degrees and Franke's cleaner only.
4. **Restart if the manual says so**: For a serious error, switch off at the main switch, wait a minute and switch on.
5. **Look at the water**: Check the tank level, the filter and the mains valve.
6. **Check the last clean**: If the daily or weekly clean was missed, run them first.

If the same message comes back, the cause is in a part you cannot reach.

## What to tell us when you book

- The model name and the full code from the rating plate.
- The exact words and colour on the screen, and any code.
- When the machine was last cleaned, filtered and serviced.
- Any service agreement you hold, and with whom.
- Whether it runs from a tank or a mains connection.

If you tried a step from this page, tell us which, so we do not repeat it.

## Franke repair near me: areas we cover

We repair Franke machines in cafés, hotels and offices across Dubai Marina, JBR, Palm Jumeirah, JLT, Downtown, Business Bay, Jumeirah, Al Barsha, Dubai Hills and Deira. If you are elsewhere, message us and we will say what we can arrange.

## Frequently asked questions

### How much does Franke coffee machine repair cost in Dubai?

The visit is AED 100 plus VAT. Most repairs cost between AED 80 and AED 400, and you agree the price first.

### Is there a Franke service centre in Dubai?

We are an independent technician and not an authorised service partner of Franke. We are an independent repair company that visits the same day in most cases.

### Do you repair the Franke A400, A600, A800 and A1000?

Yes. Send the model code from the rating plate and the wording on the screen.

### Why does my Franke say refill milk?

The A400 manual says the milk container is empty or not installed correctly. Fill it and seat it. If the message stays, the sensor or pump needs checking.

### How often must a Franke be cleaned?

The A400 manual says at least once a day, with the bean hopper, powder hopper and brewing module cleaned weekly. A technician should service it yearly or every 30,000 products.

### Can I use any cleaner on the milk system?

No. Both manuals say to use only Franke's milk system cleaner, because other agents may leave residue.

### What milk temperature does a Franke need?

Pre-cooled milk at 2 to 5 degrees Celsius.

### What should I do after a serious error?

The A400 manual says to switch off at the main switch, wait a minute, switch on, check the power supply and then contact your service technician.

### Why does my coffee taste bitter?

Franke's table lists a temperature that is too high, a grind that is too fine, too little coffee or a roast that is too dark. Change one thing at a time.

### How do I descale a Franke?

Use your own manual or ask us.

### Does a Franke run on Dubai's supply?

Franke sells versions for 220 to 240 volts single phase and 380 to 415 volts three phase. Check the rating plate against the supply.

### Is it worth repairing a Franke?

A milk, brewing or grinder fault is normally worth mending. For a board on an older unit, compare the quote with a new machine.

## Book a Franke coffee machine repair

Message us on WhatsApp at +971 55 209 9785. Give the model code, the screen message and the address.