Cuisinart makes drip coffee makers, grind-and-brew machines with a built-in burr grinder, a single-serve brewer, a pump espresso maker and, in the UK, a fully automatic bean-to-cup machine. In Dubai they reach homes from two directions: American and Canadian models built for 120 volts, and UK models rated 220 to 240 volts. That split decides a good share of what goes wrong. The rest is the familiar list: a grinder that jams, beeping that will not stop, weak coffee from a clogged chute, a CLEAN light that keeps coming back, or a machine that will not switch on.
This page works through those faults using Cuisinart's own booklets: the DCC-3200 PerfecTemp, the DGB-900 and its UK twin the DGB900BCU, the DGB-2 single-serve, the EM-100 espresso maker and the UK EM1000U bean-to-cup machine. Where a booklet said nothing on a point, we say so instead of filling the gap. Retailer listings are labelled as retailer listings. The headline is the warranty wording: the DCC-3200 warranty is for U.S. consumers only and excludes converter use, and the UK booklets say theirs is valid only within the United Kingdom.
Book a visit and a technician arrives at your address, usually on the day you message us. He names the fault and the price before fitting a part, and repairs on the spot when he can. A machine that has to go to the workshop is collected from you.
Finding the fault costs AED 100 plus 5% VAT. After that, most Cuisinart repairs fall between AED 80 and AED 400 depending on the part, and you hear the price first.
Tell us the model code from the base or the booklet, and what the lights or the display show.
Parts are genuine, and the price includes the labour.
The part and the work come with a one-month warranty.
We repair at your address first. The workshop is for faults that cannot be finished there.
FaultTypical workWhere it sits in the range
Continuous beeping on a grind-and-brewCheck the hopper lock, the filter door and the basket sensingLower to middle
Grinder jammed, noisy or not grindingClear the jam, clean the chute, check the burrs and the motorMiddle to upper
Weak coffeeClean the chute and the water path, test the heaterLower to middle
CLEAN light that returns after descalingDescale properly, then test the sensor and the heaterLower to middle
Brewing slowly or overflowingDescale, check the basket and the drip stopLower end
Single-serve will not brew or flashesClear the needles, test the pump and the grinder overloadLower to middle
Espresso maker: no pressure, no steamTest the pump and the steam valve, descaleLower to middle
Bean-to-cup messagesBrewing unit, valves, heater, boardMiddle to upper
Dead after the wrong voltageTest the heater, board and cord, then give you an honest quoteLower to upper
When a repair would cost more than a new machine of the same type, we say so before you pay anything beyond the visit.
Cuisinart's booklets cover several families, and the rules differ between them. The model code is on the base and on the booklet cover.
FamilyWhat it isVoltage statement in the booklet text
DCC-3200 PerfecTemp14-cup programmable drip coffee maker with a CLEAN indicator120-volt outlets only (US booklet)
DGB-900Grind-and-brew with a hopper and charcoal water filterNot stated
DGB900BCUThe UK version of the grind-and-brewNone stated; the guarantee excludes use on a voltage other than the one marked on the product
DGB-2Single-serve grind-and-brew that takes capsules, 48-ounce reservoirNot stated
EM-100Pump espresso maker with a steam wand and a 15 bar pump120 volt outlets only (Canadian booklet)
EM1000U VeloceFully automatic bean-to-cup machine with a milk system220-240 V AC, 50 Hz, about 1,550 W (UK booklet)
Cuisinart makes other models too. If yours is not listed, send the model code and a photo of the fault and we will say what we can do before anyone visits.
Cuisinart's own wording is blunt. The DCC-3200 booklet says the unit has been designed for use only in 120-volt outlets and only with authorised accessories and replacement parts. The Canadian EM-100C booklet uses almost the same sentence. The UK EM1000U booklet gives a different supply entirely.
SourceWhat it saysWhat kind of source
DCC-3200 bookletDesigned for use only in 120-volt outlets; the warranty excludes damage from attempted use with a converterCuisinart booklet
EM-100C bookletDesigned for use only in 120 volt outlets and only with authorised accessories and partsCuisinart Canada booklet
Desertcart UAE listing for a DCC-3200UMB-1110 volts, 1,100 watts, limited three-year warrantyUAE retailer listing
EM1000U booklet220-240 V AC, 50 Hz, about 1,550 W; a machine message for input voltage errorCuisinart UK booklet
The retailer gives 110 volts where Cuisinart's booklet says 120. Both are North American supplies, and neither is the 230 volts at the wall in the UAE.
A 120 volt machine plugged straight into a UAE socket receives close to double the voltage it was built for. A step-down transformer deals with the voltage, and its rating must exceed the machine's wattage. That is our practical advice, not a Cuisinart procedure, and the DCC-3200 warranty wording on converters is the reason to ask before buying one.
Read the plate on the base before plugging anything in. If it says 120V, you need a transformer.
UK-market machines such as the EM1000U state 220 to 240 volts in their booklet. Read the plate on yours to confirm.
Ask the seller for the voltage and the market the machine was made for, in writing, before you pay.
If a machine has already been plugged into a 230 volt socket and failed, switch it off at the wall and have it checked instead of trying again.
Cuisinart warranty and service: what applies in Dubai
BookletTermTerritory and conditions
DCC-3200Three years from the original purchase dateAvailable to U.S. consumers only. Normal home use. Excludes damage from attempted use with a converter
DGB-900Three years from the original purchase dateA U.S. toll-free number is given for service
EM-100CThree years from the original purchase dateFor maintenance beyond cleaning, the booklet sends you to Cuisinart customer service
DGB900BCU and EM1000U (UK)Three years for consumer useValid only within the United Kingdom. In the first 12 months the product goes back to the point of purchase; after that Conair UK After Sales Service repairs or replaces it
None of the booklets is written for the UAE. A machine bought here or brought here sits outside every territory above. We are an independent technician and not an authorised service partner of Cuisinart. We are independent of Cuisinart. We give our own one-month warranty on the part and the work, which does not replace a maker's warranty where one applies to you.
What you see or wantWhat the booklet says
12:00 flashing12:00 flashes in the display for 10 seconds when the coffeemaker is plugged in
CLEAN indicatorTied to descaling. You start the cycle by holding the CLEAN button until the indicator flashes
Five beepsAt the end of the descaling cycle, five beeps sound and the unit shuts off
Auto OffSettable from 0 to 4 hours after the brew cycle has finished
Brew PauseStops the flow from the basket when the carafe is removed, 20 seconds at most
Power cut or unpluggingOne-minute protection if a breaker trips, the unit is unplugged or the power fails
Water filterThe booklet recommends changing it every 60 days or after 60 uses, and more often with hard water
The booklet gives these causes. too finely ground coffee, two or more paper filters, and grounds spilling over the filter.
Removing the carafe for more than 20 seconds during a brew cycle may make the filter basket overflow.
The unit takes the Cuisinart Gold-Tone Commercial Style Filter or a standard basket-style paper filter. The basket holds a number 4 paper filter.
A machine that brews slowly after the right filter and the right grind, or that will not heat, is a service job.
Descaling the DCC-3200 and the CLEAN cycle
1
FillFill the reservoir with a mixture of one-third white vinegar and two-thirds water.
2
StartPress and hold CLEAN until the CLEAN indicator flashes, then let go.
3
WaitWhen the cycle ends, five beeps sound and the unit shuts off.
4
Repeat if it lights againIf the CLEAN indicator lights again, repeat the cycle with fresh solution.
5
RinseRun one cycle with fresh cold water.
The booklet does not say what to do if the indicator returns straight after a second cycle with fresh solution. In that case scale is no longer the likely explanation, and the heater or the sensor needs a test. That reading is ours.
Cuisinart grind-and-brew machines: beeping, weak coffee and the grinder
The US DGB-900 booklet and the UK DGB900BCU booklet carry the same kind of entries, with small differences in the remedy.
Cause listedWhere it is listed
The bean hopper is not lockedUK booklet. A separate page says that if the hopper lid is not locked in place the appliance will not operate
The filter door is openUK booklet
The filter basket or its cover is missingUK booklet
Used grounds were left in the basketBoth booklets. The US remedy is to discard the used grounds
The UK booklet's remedy line reads: press On/Off twice to resume, and reset the programme if you had one set. Fix the cause first, then resume.
ProblemCauseRemedy in the booklet
Coffee weaker than usualThe coffee chute is cloggedClean out the coffee chute
Coffee weaker than usual (UK)Too few beans in the hopperAdd beans
Coffee weaker than usual (UK)The strength setting is wrongCheck the strength shown on the LCD
Grinder not working (UK)The coffee chute is cloggedRemove the hopper, lift the coffee channel cover, clean out the chute, then replace the cover and the hopper
Both the weak-coffee entry and the grinder entry in the UK booklet point to the same chute. A machine whose chute is clean, with beans in the hopper and the strength set, is past what the booklets cover.
Grind roasted coffee beans only. The US booklet says grinding other substances such as nuts, spices or unroasted beans may dull the blade and cause poor grinding or injury.
Do not over-pack the hopper. The booklet says over-packing may result in jamming the grinder.
Keep water out of the grinder motor. The booklet says the motor may become damaged and may malfunction if water gets in.
Clean the hopper and the coffee chute every one to two weeks depending on use (US booklet). The UK booklet strongly suggests once a week.
To clear the chute, flip back the coffee channel cover, brush the grounds toward you while facing the unit, and pull the grind chute lever toward you to send the grounds through (US booklet).
The wording of the UK and US entries differs slightly, but the habit they ask for is the same: the chute, not the beans or the water, is where the booklets look first when coffee turns weak.
A grinder that is silent, grinds but drops nothing, or makes a new noise is outside these entries. We open it, check the burrs and the motor and clear whatever is stopping it.
Descaling a grind-and-brew machine
The booklets give the same ratio as the DCC-3200, one part vinegar to two parts water. The details of the steps differ between the US and UK texts.
1
FillFill the reservoir to capacity with the vinegar and water mixture.
2
Start (UK booklet)Switch on and press Grind Off, then On/Off.
3
WaitWhen five beeps sound, switch off.
4
RinseRepeat the cycle once more with cold tap water (UK) or fresh cold water (US).
The charcoal water filter is changed every 60 days or 60 uses in the US booklet, and every 90 days or 90 uses in the UK booklet, more often in hard water.
Cuisinart DGB-2 single-serve grind-and-brew
The DGB-2 pages give clear rules for the flashing lights.
What you seeMeaning and remedy in the booklet
All button lights flashing in sequenceIt is time to clean the coffeemaker. The booklet points to its decalcification instructions
The Grind button indicator flashesThe grinder is overloaded. Power off, unplug the unit and wait 5 seconds; the Grind light should come back so you can grind again. If it still flashes, remove and thoroughly clean the burr grinder, and clean the chute as well
All Brew Size buttons flashThe coffeemaker is overloaded and can be used again after the lights stop flashing. If they do not stop, the booklet says to return the appliance to the nearest Cuisinart Repair Center
The Add Water indicator is litCheck that the water reservoir is properly filled
ProblemCause and remedy in the booklet
Coffeemaker will not brewThe piercing needle and/or exit needle may be clogged
Not grinding beansBeans may be too tightly packed. Do not fill above the Max Fill line
Coffee not strong enoughReduce the brew size for a stronger cup, or try an extra-bold coffee capsule
The front pages list a removable 48-ounce reservoir and a hopper that holds up to 100 g of beans. The brewer shuts off automatically when idle for longer than 30 minutes. If the Cuisinart Repair Center the booklet names is not reachable from the UAE, a flashing Brew Size row that never clears is the point at which to message us instead.
The EM-100C booklet has a feature list and safety rules but no troubleshooting section. For maintenance other than cleaning, it directs you to Cuisinart customer service on a Canadian number. The booklet's safeguards are therefore the useful part.
Use only cold water in the water reservoir.
Never remove the portafilter holder during the brewing operation, because the machine is under pressure.
An extension cord is not recommended. If one is used it must be grounded and rated for the same or higher wattage as the appliance.
Do not clean any parts or accessories in the dishwasher.
Pour cold refrigerated milk into the stainless frothing pitcher, approximately half full.
Hold the steam nozzle about a half-inch (1.25 cm) below the surface of the milk.
Do not let the steam spurt unevenly, because that creates large bubbles.
Stop the steam immediately when the milk is heated by turning the large function knob to off, and do not boil the milk.
The solution is one-third white vinegar and two-thirds water. Let half of it run through the brew head and the remaining half through the steam wand, then let one cycle of fresh cold water through the unit before brewing coffee again.
The feature list shows a 15 bar pump and the booklet says no more about it. If the reservoir is full, the machine is clean and descaled, and there is still no pressure or no steam, the pump or the steam valve needs a test. That test is ours to run, not a booklet procedure.
The UK EM1000U booklet is the most detailed Cuisinart document. It rates the machine at 220-240 V AC and 50 Hz, with about 1,550 W overall, a continuous-flow thermoblock heater of about 1,400 W and a pump listed at 15 bar. The tank holds 1.25 litres. The ambient temperature for fault-free operation is given as 8 to 40 degrees Celsius. The warranty is valid only in the UK.
MessageRemedy in the booklet
Water tank emptyRefill the tank
Waste container full or missingEmpty, clean or refit it
Brewing unit missingInstall the brewing unit
No beansFill the bean container
Brewing unit blocked, or clean brewing unitClean the brewing unit
Cleaning prompt, descaling promptRun the cleaning program or the descaling program
Process aborted, or a malfunctionThe machine returns to standby
Coffee temperature faultyDescale. If it recurs, contact Customer Care
Motor valve error, main switch blocked, communication failureSwitch off, let the machine cool for 30 minutes, switch on. If it recurs, contact Customer Care
Input voltage errorCheck that the supply matches the appliance. If it recurs, contact Customer Care
Grinding too fineSet a coarser grind or use coarser pre-ground coffee
Tank overflowed or wetUnplug, then dry the tank and its compartment
Tank lid missingFit the lid
Too much air in the systemTop up the tank
Coffee shaft blockedClear it with a round brush through the ground coffee chute
Grinder clogged by foreign matterEmpty the beans, turn the grinder anticlockwise by its cover and vacuum
Bean container lid opened during grindingClose the lid
ProblemCause and remedy in the booklet
Coffee not hot enoughCold cups or a low temperature setting. Warm the cups with hot water and raise the temperature
Coffee too weakToo little coffee, a wrong grind, a clogged chamber or changed beans. Measure properly, change the grind and the quantity, clean the chute
Very loud noiseForeign matter in the grinder. Unplug, empty the beans and clean the grinder. Contact Customer Care if it persists
No froth, no milk, or milk in the wastePoor connection, a bent tube, an empty container, a clogged nozzle or a blocked steam outlet. Check the connection, reseat the frother, reposition the tube, refill, clean the nozzle, descale
Low-quality frothA dirty nozzle or system, a blocked outlet or unsuitable milk. Clean, descale and use cold low-fat milk
Water tank empty shown when it is fullAir in the system, limescale or a clog. Dispense hot water, clean the tank, run cleaning or descaling
No warning when the tank is emptyMoisture in the tank shaft. Unplug and dry the tank and shaft thoroughly
Waste container warning too earlyIt was emptied while the machine was off. Empty it only while the machine is on
Water in the waste containerNormal rinse behaviour. No action needed
Slow dispensingGrind too fine, quantity too high or scaling. Coarser grind, lower quantity, run descaling
Water into the waste during the on/off rinseBrewing unit blocked or misaligned. Reseat or clean the brewing unit
Will not switch onNot plugged in. Plug it in
Uneven or one-sided dispensingThe spout is blocked. Clean the spout or remove debris
Very watery coffee or only hot waterThe coffee shaft is blocked. Clear it through the chute with a round brush
For milk drinks the booklet says cold, low-fat milk. Warm, old or high-fat milk gives poor froth. Soya or rice milk can be used, but the booklet says good frothing results are not possible with these products.
EM1000U cleaning, descaling and the waste container
Run it monthly or when prompted. It takes about 8 minutes and must not be interrupted.
Use one commercial cleaning tablet made for fully automatic espresso machines, dropped into the ground coffee chute.
Afterwards, fill the tank with fresh water and brew one cup to flush residue, then discard it.
Use only Durgol Swiss Espresso. The booklet says other products are not covered by liability.
Put 250 ml of water and 125 ml of Durgol in the water tank.
It takes about 10 minutes in two phases, descaling and then rinsing, and must not be interrupted.
Descale at regular intervals and at the latest when the descaling symbol appears. How often depends on the water hardness you set in the machine's settings.
Avoid skin and eye contact with the solution. Rinse thoroughly, and rinse the brewing unit after every descale.
Empty the waste container immediately after each use to prevent mould, and clean it daily if you use the machine daily.
No coffee is dispensed while the machine flags the container as full.
Empty it only while the machine is on. Emptying it while off is not detected and can trigger an early prompt later.
After milk drinks, do a quick milk clean with 250 ml of water, and a full clean with cleaning solution when the machine prompts for it.
The booklet names a single descaler. Tell us the model and the prompt on the display, and we will say whether a visit is needed or whether the machine is only asking for a cleaning tablet.
DocumentWhat it says to use
DCC-3200 bookletOne-third white vinegar to two-thirds water, then a rinse cycle of fresh cold water
DGB-900 and DGB900BCU bookletsVinegar and water at one part to two, then a repeat cycle with cold water
EM-100C bookletOne-third white vinegar to two-thirds water, half through the brew head and half through the steam wand
DGB2U bookletNot stated
EM1000U bookletDurgol Swiss Espresso only, 125 ml in 250 ml of water
Use whichever your own booklet names. If you no longer have it, give us the model code and we will tell you what the booklet for that model says.
Power, plugs and extension cords
The DCC-3200 booklet says the polarized plug fits a polarized outlet only one way and tells you not to modify the plug in any way.
For long extension cords, the DCC-3200 and DGB-900 booklets say the cord's marked rating must be at least as great as the appliance's.
The EM-100C booklet says an extension cord is not recommended, and that if one is used it must be grounded and rated for the same or higher wattage.
The EM1000U booklet says to use a supply that matches the appliance's rating.
An adapter that only changes the shape of the pins leaves the voltage unchanged. A 120 volt machine needs a transformer, and the DCC-3200 booklet's converter exclusion is a reason to ask first.
The DCC-3200 booklet says to use only Cuisinart-authorised accessories and replacement parts.
Never open the filter basket mid-brew on a drip machine. This is our advice: hot water and steam are under the lid.
Switch off and unplug the machine before you clean it, and let it cool before removing parts. This is our advice, and a basic rule for any heated appliance.
Keep the base, cord and plug out of water.
Stand back when steaming milk, because steam and hot water can spurt from the wand.
Do not use a machine with a damaged cord or plug.
Ask whoever you choose what warranty they give on the part.
TaskHow oftenSource
Change the charcoal water filterEvery 60 days or 60 uses (DCC-3200, US DGB-900); every 90 days or 90 uses (UK grind-and-brew)Booklets
Clean the hopper and chuteEvery one to two weeks (US DGB-900); weekly (UK)Booklets
DescaleWhen the CLEAN light or the descaling prompt appears; follow your own booklet's productBooklets
Run the EM1000U cleaning programMonthly or when promptedEM1000U booklet
Empty the EM1000U waste containerAfter each useEM1000U booklet
Clean the DGB-2 chute when cleaning the grinderWhenever the grinder is cleanedDGB-2 booklet
Three entries across the two booklets point at a clogged chute, so the weekly or fortnightly chute clean is the habit the booklets themselves lean on.
What you seeWhat the booklet says
12:00 flashes after plugging inThe DCC-3200 display flashes it for 10 seconds when the unit is plugged in
Five beeps at the end of a cycleOn the DCC-3200 and the grind-and-brew machines, five beeps mark the end of the descaling cycle
Water in the EM1000U waste containerRinse behaviour that needs no action
The machine switches itself offAuto Off on the DCC-3200 (0 to 4 hours); after 30 minutes idle on the DGB-2
Brew Pause on the DCC-3200Stops the flow when the carafe is removed, up to 20 seconds
A sign that returns after you have done what the table says is a real fault.
Where the booklets stop and a technician starts
Cuisinart's booklets are careful about the user-side faults and quiet about everything inside the machine. These are the gaps we meet.
SituationWhat the booklet offersWhat we do
CLEAN light returns after two descalesRepeat with fresh solutionTest the heater and sensor
Beeping continues with the hopper locked, door shut and basket emptyNothing furtherTest the hopper and door switches
Brew Size lights keep flashing on the DGB-2Return to a Cuisinart Repair CenterOpen it, check the pump and the board
EM1000U message recurs after a 30-minute cool-downContact Customer Care (UK)Check the brewing unit, valves and heater
Input voltage errorCheck the supply, then Customer CareCheck the socket, any transformer and the board's supply
EM-100 gives no pressure or steamNothing; no troubleshooting sectionTest the pump and the steam valve
Where the booklet sends you to Customer Care, the number is a UK, US or Canadian one. Our visit covers the same ground locally.
1
BookingSend us the model code, what the machine is doing and where you are.
2
ArrivalOur technician comes to you, usually on the day you message us.
3
Supply checkHe reads the plate, compares it with the socket, and looks at any adapter or transformer before opening the machine.
4
DiagnosisHe tests the grinder, the hopper lock and door switches, the water path, the heater, the pump and the board, in the order your symptoms point.
5
QuoteYou hear the price first, and a part goes in only when you agree.
6
TestHe brews a cup, and grinds one on a grinder model, before he leaves.
7
CoverThe part and the work carry a month of warranty.
If the machine must go to the workshop, we collect it, tell you the reason and give you a return time.
The rule below is our own: price a new machine of the same type and think twice about a repair that costs half as much.
FaultWhat we would do
Jammed grinder, blocked chute, hopper or door switchA normal repair
Pump or steam valve on the EM-100Price it against a new espresso maker
Board fault on a basic drip machineCompare the quote with a new machine
Failure after a 120 volt model was plugged into 230 voltsTest first; the damage may cost more than the machine is worth
Messages on the EM1000U that recur after coolingWorth a diagnosis, because the machine is a larger purchase
If you choose to buy new, the diagnostic fee still applies. Ask the seller for a 230 volt model, or a UK-market one, and get the voltage in writing.
Is the hopper locked, the filter door closed, and the basket and cover in place? The booklets list these as the beeping causes on a grind-and-brew.
Did the CLEAN light or a descaling prompt get its cycle?
Does the plate on the base match the socket, or the transformer you are using?
Did you wait the 5 seconds or the 30 minutes your booklet gives for the fault?
If none of that clears it, unplug the machine and message us.
The model code from the base or the booklet.
The voltage and wattage on the plate.
The beep pattern, the flashing lights or the message on the display.
How it is plugged in, and whether a transformer is used.
When it was last descaled and whether the chute was cleaned.
Add any fixes from this page that you have already tried.
We cover Dubai Marina, JBR, Palm Jumeirah, JLT, Downtown, Business Bay, Jumeirah, Al Barsha, Dubai Hills and Deira for Cuisinart machines. If you are outside those districts, ask us.
How much does Cuisinart coffee machine repair cost in Dubai?
+
The visit is AED 100 plus VAT. Most repairs then cost AED 80 to AED 400, and you approve the price before we start.
Is there a Cuisinart service centre in Dubai?
+
The booklets give U.S., Canadian and UK contacts. We are independent of Cuisinart.
Can I use an American Cuisinart in the UAE?
+
Only with a step-down transformer. The DCC-3200 and EM-100C booklets say the machine is designed for 120 volt outlets only, and the DCC-3200 warranty excludes converter use. UAE supply is 230 volts.
Why does my Cuisinart grind-and-brew keep beeping?
+
The booklets list a hopper that is not locked, an open filter door, a missing basket or cover, or used grounds left in the basket. Fix the cause, then resume.
Why is my Cuisinart coffee weak?
+
The booklets list a clogged coffee chute, too few beans or the wrong strength setting. Clean the chute first.
What does the CLEAN light mean?
+
It belongs to the descaling cycle. The DCC-3200 booklet says to fill the reservoir with one-third white vinegar and two-thirds water, hold CLEAN until it flashes, and rinse with fresh water afterwards.
Why is the grinder light flashing on my DGB-2?
+
The booklet says the grinder is overloaded. Power off, unplug the unit and wait 5 seconds. If it still flashes, remove and thoroughly clean the burr grinder and the chute.
Can I use vinegar on every Cuisinart?
+
The DCC-3200, DGB-900 and EM-100C booklets use white vinegar. The EM1000U booklet says to use only Durgol Swiss Espresso, so check your own booklet.
How often should I change the charcoal filter?
+
The DCC-3200 and US DGB-900 booklets say every 60 days or 60 uses. The UK DGB900BCU booklet says every 90 days or 90 uses.
Why does my EM1000U show Input voltage error?
+
The booklet says to check that the supply matches the appliance and, if it recurs, to contact Customer Care. That is a UK service line, so in Dubai message us.
Why does my Cuisinart show 12:00 flashing?
+
The DCC-3200 display flashes 12:00 for 10 seconds when the unit is plugged in. It is not a fault code.
Is it worth repairing a Cuisinart?
+
A grinder, chute, switch, pump or valve fault usually is. For a board on a basic drip machine or a unit damaged by the wrong voltage, compare our quote with the price of a new machine.
Message us on WhatsApp at +971 55 209 9785. Tell us which model you have, what it does and your area.
