Dryer Repair Dubai | Tumble Dryer Repair and Vent Cleaning

Overview

One Click Dubai repairs clothes dryers at home across Dubai, with same-day visits and bookings taken at any hour. Dryer repair covers vented, condenser and heat pump tumble dryers of every brand, and every fault: not heating, slow drying, a drum that will not turn, noise, a burning smell or a machine that will not start.

We also clean dryer vents and lint ducts, service condenser and heat pump dryers, and install and stack dryers. About 90% of the parts we need are in stock, and most repairs are finished in one visit.

This page explains how the three kinds of dryer differ, what to check before you book, which fault matches which symptom, and how to keep a dryer safe and quick.

Dryer repair in Dubai: what we fix and what it costs

Dryer repair in Dubai from One Click Dubai starts with an AED 100 diagnostic visit, plus VAT, which finds the fault. You then get the repair price and decide. Published market prices for a dryer repair in the city run from about AED 200 to AED 500, depending on the fault and whether a part is replaced.

What you want to knowOur answer

How soon can you come?The same day

Which dryers?Vented, condenser and heat pump tumble dryers, and commercial dryers

Where is it repaired?At your home for most faults. In our workshop for some jobs, by agreement

What does the visit cost?AED 100 plus VAT for the diagnostic. No surcharge at night or at weekends

Do you have the parts?About 90% are in stock. If one must be ordered, you hear the arrival date first

Do you clean dryer vents?Yes, as a repair step or as its own booking

Is the repair covered?Yes, by a one-month warranty on parts and labour

If the dryer is inside the maker's warranty, contact the maker first. For a machine that washes and dries in one drum, see washer dryer repair.

Which dryer do you have: vented, condenser or heat pump?

A tumble dryer is one of three kinds, and the kind decides what can go wrong. A vented dryer blows damp air outdoors through a hose. A condenser dryer turns the moisture into water and collects it in a tank. A heat pump dryer does the same using a small refrigeration circuit in place of a heating element.

VentedCondenserHeat pump

How to recognise itA wide hose at the back, leading to a wall or windowA water tank to empty, and a condenser unit behind a flap at the bottomA water tank, a filter at the bottom front, and an A-class energy label

How it heatsElectric heating elementElectric heating elementCompressor and refrigerant. No element on most models

Where the water goesOut through the hose, as vapourInto the tank, or a drain hoseInto the tank, or a drain hose

Normal cycle timeShortestMediumLongest. Two to three hours for a full load is normal

Faults of its ownBlocked or crushed vent hoseBlocked condenser unit, pump or float fault, tank not emptiedBlocked lower filter and evaporator, sensor faults, refrigerant circuit

Owner maintenanceLint filter. Vent hose and outside flapLint filter. Tank. Condenser unit rinsed monthlyBoth filters. Tank. Evaporator fins kept clear

Tell us which kind you have when you book. If you are not sure, a photo of the back and of the area behind the bottom flap is enough.

Five checks before you book

Five checks settle many dryer not working calls without a visit: the lint filter, the water tank, the door, the programme and the airflow. They take five minutes.

Lint filter

Pull it out and clear it. If the mesh looks clean but water will not pass through it under a tap, it is coated with fabric softener residue. Wash it with warm soapy water and a soft brush.

Water tank

On a condenser or heat pump dryer, a full tank stops the machine and lights an indicator. Empty it and push it fully home.

Door

Close it firmly until it clicks. Fluff on the catch stops the switch closing, and the dryer will not start.

Programme and options

A cool, airing or low-heat option dries very slowly by design. So does a delay timer or a child lock.

Airflow

On a vented dryer, check the hose behind it is not crushed, and feel for a strong flow at the outside flap. On a condenser dryer, rinse the condenser unit. On a heat pump dryer, clean the lower filter.

One more: the load

A drum packed tight cannot tumble, and the middle of the load stays wet.

Clothes that came out of the washer dripping, because the spin failed, take hours to dry. The fault is then the washing machine.

A single bulky duvet rolls into a ball and dries only on the outside.

Dryer problems we repair, by symptom

Most dryer faults show up as one of ten symptoms, and each points to a short list of parts. The table matches what you notice to the usual causes and to what we do.

What you noticeUsual causesWhat we do

Tumbles but no heatHeating element, thermal fuse, thermostat or control fault. On a heat pump dryer, the compressor circuitTest each in turn and replace the failed part

Heats but takes too longPoor airflow: lint, vent, condenser or filters. Moisture sensor coatedClean the air path and sensor, measure the airflow

Stops after a few minutesOverheating from poor airflow, tank full, sensor ending the cycle earlyClear the air path, test the sensors

Drum does not turn, motor humsBroken belt, seized roller or bearing, motor capacitorOpen the cabinet, replace the failed part

Drum does not turn, no soundDoor switch, start switch, thermal fuse, control board, motorTest the start circuit

Squeak, squeal or grindWorn rollers, idler pulley, drum bearing or glidesReplace the worn parts

Thump with each turnFlat-spotted roller, belt damaged, object in the drum finsInspect and replace

Burning smellLint on the heater, slipping belt, motor overheatingSwitch off. Clean, inspect and repair

Water on the floorCondenser or heat pump dryer: pump, float, hose or door sealFind and repair the leak

Trips the breakerHeating element shorted to the case, motor fault, damaged cableInsulation tests, replace the faulty part

Too hot to touch, clothes scorchedThermostat stuck, airflow blockedSwitch off. Test thermostats and clear the airflow

Dryer not heating

A dryer not heating, with the drum turning, has usually lost its heating element or blown its thermal fuse. The fuse is a safety part that opens when the dryer overheats, and it almost always overheats because air cannot get out. Replacing the fuse without clearing the airflow blows the new one.

Dryer typeLikely causesRepair

VentedThermal fuse blown by a blocked vent, heating element open circuit, thermostat failedVent cleared, part replaced

CondenserResettable or one-shot cut-out tripped by a blocked condenser, element failed, thermostatCondenser cleaned, cut-out reset or replaced, element replaced

Heat pumpBlocked lower filter or evaporator, sensor fault, compressor or its start parts, refrigerant leakFilters and fins cleaned, sensors and compressor tested, sealed circuit repaired if needed

What the technician tests

The element, for continuity, and for a short to the metal case.

The thermal fuse and each thermostat.

The supply to the heater. On some dryers one half of the element can fail, giving weak heat.

The airflow, before fitting any new safety part.

Heat pump dryers

A heat pump dryer runs at a lower temperature, so the drum and the clothes feel only warm. That is normal and does not mean it has stopped heating. A real fault shows as cycles that never end, wet clothes after three hours, or an error code. Our technicians repair the refrigerant circuit on these dryers as well as the electrical parts.

Dryer takes too long, or clothes are still damp

A dryer that takes too long to dry is nearly always short of airflow, not heat. Hot air has to pass through the clothes and leave carrying the moisture. Anything that slows it, such as lint, a crushed hose, a blocked condenser or a clogged filter, lengthens the cycle and overheats the heater.

CheckWhat you should findIf not

Lint filterClean, and water runs through the meshWash off softener residue

Vent hose, vented dryersShort, smooth, with no kinks or sagsShorten or replace it. Clear lint inside

Outside flap or grilleOpens fully, with a strong warm flowClear lint and nests from the outlet

Condenser unit, condenser dryersFins clear when held to the lightRinse under a tap until clear

Lower filter and evaporator, heat pump dryersFree of fluffClean the filter. Have the fins cleaned if matted

Moisture sensor bars inside the drumBright metalWipe with a little white vinegar. Softener film makes the dryer stop early

The roomVentilated, especially for a condenser dryerA condenser dryer in a closed cupboard recirculates its own hot air

When it stops early with damp clothes

Sensor programmes stop when the sensor reads dry. A coated sensor reads dry too soon. Mixed loads do the same: thin shirts dry first and the sensor ends the cycle while the towels are still damp. Dry similar fabrics together, or use a timed programme.

If the air path is clear and drying is still slow, the heating element may be working on one half only, or the thermostat is cutting the heat early.

Dryer not spinning, or drum not turning

A dryer not spinning has a broken drive belt in most cases. The belt is a thin band that runs round the drum and the motor pulley. When it snaps, the motor runs freely and the drum stays still. Many dryers have a switch that stops the motor as well when the belt breaks.

What happensLikely causeRepair

Motor runs, drum still. Drum spins very easily by handBelt broken or off its pulleyBelt replaced. Idler pulley and rollers checked

Hum, no movement. Drum stiff by handSeized roller or bearing, or something jammed at the drum edgeCabinet opened, part replaced

Hum, no movement. Drum free by handMotor capacitor or motorCapacitor or motor replaced

Nothing at allDoor switch, belt switch, thermal fuse, start switch, boardStart circuit tested

Turns, then stops when loadedBelt slipping, worn idler pulleyBelt and pulley replaced

Turns one way only, clothes tangleReversing fault on the board or motor, on dryers that reverseBoard or motor tested

A belt rarely fails alone. Stiff rollers or a worn pulley make it work harder, so we check and replace them at the same visit, to avoid a second breakdown.

Dryer making noise

A dryer making noise, whether squeaking, squealing, grinding or banging, is telling you which part has worn. The sound and its rhythm identify it, and catching it early matters: a seized roller or bearing breaks the belt and can score the drum.

NoiseLikely part

High squeak or squeal, constantIdler pulley or a drum roller

Squeal at start-up onlyBelt slipping, or motor bearings

Rhythmic thump, once per turnFlat spot on a roller, or a lump on the belt

Scraping metalWorn drum glides or front bearing strip, drum rubbing the cabinet

Low grinding or rumbleRear drum bearing or motor bearings

Rattle or clickCoin, button or bra wire caught in a drum fin or the fan housing

Loud hum, no turningMotor trying to start against a seized part. Switch off

Whirring that fades when the door opensFan blower clogged with lint or loose on its shaft

Buttons and zips tapping the drum are normal. Empty pockets, fasten zips, and check the drum fins for trapped objects before assuming a fault.

Dryer not starting, or stopping mid-cycle

A dryer not starting, with lights on, usually has a door switch that is not closing. With no lights at all, the fault is the supply or the thermal fuse. A dryer that starts and stops after a few minutes is overheating or thinks its tank is full.

What happensLikely cause

No lightsSocket or breaker, cable, thermal fuse, control board

Lights on, Start does nothingDoor switch, child lock, start switch, belt switch

Starts only when the door is pushed hardDoor catch or switch worn

Runs a few minutes, stops, restarts when coolOverheating: blocked airflow, or a failing thermostat

Stops with the tank light on, tank emptyFloat switch stuck, pump failed, or the tank's drain path blocked

Stops with a filter or condenser lightThe machine is asking for cleaning

Display dead after a power cutBoard damaged by a surge

Burning smell, and dryer fire safety

A burning smell from a dryer means lint is scorching on the heater, a belt is slipping, or the motor is overheating. Switch the dryer off and leave the door shut. Lint is fine, dry fibre that lights easily, and it collects wherever air slows down.

Stop the dryer

Switch off at the socket. Do not open the door if you see smoke: air feeds a smouldering load.

Let it cool

Before touching the load or the filter.

Do not restart it

Until the lint path has been cleaned and the cause found.

Habits that prevent dryer fires

Clean the lint filter before or after every load.

Have the vent hose, and the inside of the cabinet, cleaned of lint once a year.

Do not run the dryer when you are asleep or out.

Do not dry items soiled with cooking oil, petrol, solvents or wax. Wash them hot first, and line-dry if in doubt.

Let the cool-down phase finish, and do not leave a hot load piled in the drum or a basket.

Use a rigid or semi-rigid metal vent hose where you can. Thin plastic hose sags, traps lint and burns.

Clothes that feel much hotter than usual at the end of a cycle are an early warning of a stuck thermostat or a blocked vent.

Dryer parts we repair and replace

Nine parts account for most dryer repairs. Each has a clear job and a recognisable way of failing, which helps you judge a diagnosis.

PartWhat it doesSigns it has failed

Drive beltTurns the drumMotor runs, drum does not. Drum spins freely by hand

Idler pulley and drum rollersTension the belt and carry the drumSqueal, thump, belt wear

Drum bearing, glides and felt sealsSupport the drum and seal it to the cabinetScraping, grinding, clothes marked or caught at the drum edge

Heating elementHeats the airNo heat, weak heat, or tripping breaker

Thermal fuse and thermostatsLimit the temperatureNo heat or no start after overheating. Scorching if stuck closed

Motor and capacitorDrives the drum and the fanHum without turning, burning smell, cutting out when hot

Door switch and catchTell the dryer the door is shutWill not start, or stops when the door flexes

Condensate pump and floatMove water to the tank on condenser and heat pump dryersTank light with an empty tank, water on the floor

Moisture sensor and control boardEnd the cycle at the right drynessStops too early or never stops, dead display, error codes

Parts prices depend on the model, so we quote them after the diagnostic. Dryer belt replacement, a thermal fuse replacement and new rollers are small repairs. A heating element replacement sits in the middle. A motor, a control board or a heat pump circuit is a larger one.

Dryer vent and lint cleaning

Dryer vent cleaning removes lint from the hose and duct that carry a vented dryer's exhaust outdoors, and from inside the dryer cabinet. It shortens drying times, stops thermal fuses blowing, and removes the main fuel for dryer fires. Clean the vent about once a year, or sooner in a busy household.

Signs the vent needs cleaning

Loads take longer than they used to.

The dryer, the clothes or the laundry room feel hotter than normal.

A musty or scorched smell.

Lint gathering behind the dryer or round the outside flap.

The outside flap barely opens when the dryer runs.

The dryer stops mid-cycle and restarts after cooling.

What we do

Disconnect and inspect

The hose is taken off, and its length, material and route are checked.

Clean the duct

Lint is brushed and vacuumed from the hose, the wall duct and the outside outlet.

Clean inside the dryer

The lint housing, the fan and the area round the heater are cleared, since lint collects there where no owner can reach.

Refit and test

The hose is refitted without kinks, and the airflow at the outlet is checked.

A vent that will never work well

Longer than a few metres, or with several sharp bends.

Crushed flat behind a dryer pushed against the wall.

Thin plastic or foil hose that sags and holds lint.

Ending inside a cupboard, a ceiling void or a closed room, where the damp air has nowhere to go.

We replace unsuitable hose and re-route short runs. For the ducts of the air conditioning system, see AC duct cleaning.

Condenser and heat pump dryer care

Condenser and heat pump dryers have no vent, so their lint ends up in filters and on a heat exchanger inside the machine. Most slow-drying complaints on these dryers are cured by cleaning that the manual describes and few owners do.

PartWhere it isHow oftenHow

Door lint filterIn the door openingEvery loadLift out, peel off the fluff, wash monthly

Water tankTop drawer or bottom frontEvery load, unless plumbed to a drainEmpty and refit firmly

Condenser unit, condenser dryersBehind the flap at the bottomMonthlyUnclip, rinse through under a tap, drain and refit

Lower filter, heat pump dryersBehind the flap at the bottomEvery few loadsRemove, brush or rinse the foam and mesh, dry and refit

Evaporator fins, heat pump dryersBehind the lower filterWhen fluff is visibleSoft brush or vacuum only. The fins bend and cut

Moisture sensorInside the drum, below the doorMonthlyWipe with a damp cloth

Some heat pump dryers clean their own heat exchanger with condensed water and have no lower filter. They still need the door filter cleaned and the tank emptied. When the fins on any heat pump dryer are matted beyond brushing, book a service, because the machine has to be opened.

Dryer repair cost in Dubai

Dryer repair cost in Dubai typically falls between AED 200 and AED 500, according to prices published by companies in the city in 2026. Our diagnostic visit is AED 100 plus VAT, and the technician gives you the repair price before starting.

Lower end. a belt, a thermal fuse, a door switch, cleaning a blocked air path.

Middle. a heating element, rollers and pulley, a pump.

Upper end and above. a motor, a control board, a drum bearing, or sealed-circuit work on a heat pump dryer.

Parts for Miele, Bosch, Siemens and AEG dryers cost more than for most other brands.

Few companies in Dubai publish part-by-part dryer prices, so the range above is a guide to the market and not our price list.

Repair or replace?

Repair a dryer when the repair costs less than about half the price of a comparable new one. Vented and condenser dryers are simple machines, and most of their faults are worth fixing at any age. Heat pump dryers cost more to buy, so they justify larger repairs.

SituationUsually better to

Belt, fuse, thermostat, rollers, door switch, pumpRepair

Heating elementRepair

Motor or control board, dryer under eight yearsRepair

Motor or board on an old budget vented dryerCompare both prices

Heat pump compressor or refrigerant leak, premium dryerRepair, after a firm quote

Drum cracked, cabinet rusted, repeated faultsReplace

Dryer installation and stacking

We install dryers, connect vent hoses and drain hoses, and stack dryers on washing machines. A dryer needs a level floor, a socket of its own, air around it, and either a route outdoors for its vent or a drain for its water.

Position and level

All four feet down and adjusted. An uneven dryer is noisy and wears its rollers.

Vent, on vented dryers

The shortest, straightest run to the outside, in rigid or semi-rigid hose, with the dryer left far enough from the wall not to crush it.

Drain, on condenser and heat pump dryers

The small drain hose at the back can go to a waste pipe, so the tank never needs emptying.

Power

Straight into a wall socket. No extension lead, and not shared with the washing machine on one adaptor.

Stacking

Only with the maker's stacking kit, which locks the dryer to the washer. The dryer always goes on top.

Test

A short cycle, with heat, airflow and drainage checked.

A condenser dryer needs a ventilated room. In a closed cupboard it heats its own air and dries slowly.

Commercial and laundry-room dryers

We repair commercial dryers in building laundry rooms, staff accommodation, salons, gyms and laundries. They run many cycles a day, so lint builds up faster and belts, rollers and elements wear sooner. Regular lint and vent cleaning matters even more on these machines, for both drying time and fire safety.

Dryer brands we repair, and washer dryers

We repair every dryer brand sold in the UAE, including LG, Samsung, Bosch, Siemens, Miele, AEG, Electrolux, Beko, Whirlpool, Ariston, Indesit, Hoover, Candy and Hisense.

A washer dryer, which washes and dries in the same drum, has its own page: washer dryer repair. For the washing machine beside the dryer, see washing machine repair.

Dryer repair near me: areas we cover

If you are searching for dryer repair near me in Dubai, our dryer technicians travel from Al Quoz to every district, including Dubai Marina, JBR, JLT, Palm Jumeirah, Downtown, Business Bay, Jumeirah, Al Barsha, Dubai Hills, Arabian Ranches, JVC, Mirdif, Dubai Silicon Oasis, Deira and Bur Dubai.

Frequently asked questions

How long does a dryer repair take?

Most repairs take about an hour. Jobs that need the drum out, such as a bearing, take longer.

Why does my dryer take two cycles to dry?

The air cannot get out. Clean the lint filter, then the vent hose or the condenser unit. If it is still slow, the heater may be working at half power.

Is it normal for a heat pump dryer to be slow?

Yes. Two to three hours for a full load is normal, because it dries at a lower temperature. It uses much less electricity doing so.

Can I use my dryer without the vent hose?

Not in a closed room. A vented dryer blows hot, damp, linty air into the room, which causes condensation and mould.

Why does my dryer smell musty?

Damp lint in the filter housing, the condenser or the tank. Clean all three, and leave the door open after use.

My dryer is hot but the clothes stay wet. Why?

Heat without airflow. The vent, filter or condenser is blocked, so the moisture has nowhere to go.

How often should the lint filter be cleaned?

Every load. Wash it with soapy water about once a month to remove softener film.

Can a dryer be put on top of any washing machine?

Only with the correct stacking kit, and only on a front-loading washer of the same width.

Do dryer sheets harm the dryer?

They leave a film on the lint filter and the moisture sensor. Wash the filter and wipe the sensor regularly if you use them.

Do you repair the washing machine on the same visit?

Yes. Tell us when you book, so parts for both come with the technician.

Book a dryer repair in Dubai

To book, use the online form, send a WhatsApp message or call +971 55 209 9785. Tell us the brand and model, whether the dryer is vented, condenser or heat pump, and what it is doing.

If there has been a burning smell, leave the dryer switched off until the technician arrives.

Dryer Repair in Dubai: Tumble Dryer Repair, Service and Vent Cleaning